KO-GEAR Koolbeam S7:
The Koolbeam S7 LED bulbs are insanely easy to install and are Plug n Play, not plug and pray. No relay wire harness to run and a removable rotational collar make them very simple to fit and plug in and turn on! Instant intensity!
The Koolbeam's dual-sided post is only 3.65mm thick, which allows the opposed LED's to be positioned so close to the centre of the bulb, therefore in the right position to focus properly in your headlight optics. The Koolbeam S7 has a lot of intensity packed into their sweet spot = more light on the road.
The Koolbeam S7 headlight bulbs utilize a copper heat pipe to draw the high temps away from the LED chips and down towards the fan in their base. The turbine fan helps to actively cool the copper heat sink by drawing cool air in and exhausting hot air out of each side. This design minimizes static pressure and stress on the system, and compared to passively cooled setups without fans; works much more effectively to keep the bulb performing at its peak.
A cool beam lamp is a type of light that is designed to redirect its heat away from the light beam. An early use for cool beam lamps was in slide projectors. Since the ko-gear Koolbeam does just that, the product was name Koolbeam and It is perhaps fitting that the Koolbeam LED's are great replacement in headlight projectors.
Unlike many LED globes available in the world, The Koolbeam's come standard in 5000k colour, which is pure white. If you want a warmer LED colour, the 4300k colour can be ordered.
LED Chips: ETI-7535
Waterproof rate: Water and dust proof IP68
Colour temperature: 4300k, 5000k
Operating Voltage: 8-32v
Lumen : 4200LM
Power: 40W with Anti-interference LED driver
Material: Aviation aluminium + copper
Heat dissipation principle: Spiral (fan) heat dissipation
Lifespan: ≥30000 hours
Adjustable Collar: Removable and 360 degrees rotation adjustment